Extend your Starlink with TX-E Connect

Starlink has been a genuine game-changer for rural and regional Australia. For properties that spent years making do with Sky Muster satellite, patchy 4G, or nothing at all, having fast, reliable internet arrive via a small dish on the roof is a meaningful shift in how a property can operate.

But Starlink solves the internet problem at the house. It doesn't solve the property.

The WiFi from your Starlink router covers your home — perhaps 20 to 50 metres outdoors under good conditions. The shed is 100 metres away. The granny flat is 150 metres away. The front gate is 300 metres down the driveway. The back paddock doesn't exist as far as your Starlink router is concerned.

This is the gap TX-E Connect is built to close.

Why Standard WiFi Can't Bridge the Gap

The instinctive first attempt for most people is a WiFi extender or a mesh node. It works in the house. Why not outside?

The answer is frequency. Standard WiFi — including the latest mesh systems — operates at 2.4 GHz and 5 GHz. These frequencies carry a lot of data but lose energy quickly over distance and struggle with the materials rural properties are full of: corrugated iron, dense vegetation, undulating terrain, and the sheer open distance between buildings.

By the time a 5 GHz signal has travelled 80 metres across open ground and hit a steel shed wall, there's typically nothing left to work with. A mesh extender using the same frequency faces exactly the same barrier — it just moves the problem a little further along.

TX-E Connect uses WiFi HaLow (802.11ah), which operates at 900 MHz. Lower frequency means greater range, better penetration through obstacles, and reliable performance at the distances a rural property actually demands. It's not a faster version of home WiFi. It's a different technology built for a different environment.

What Extending Your Starlink Actually Looks Like

The TX-E Connect system works as a two-device setup — one unit at the house, one unit at each location you want to cover.

At the house: TX-E Connect Outdoor is mounted in an elevated position — on the roof, above the verandah, or on a pole — where it has a clear view across the property. It connects wirelessly to your Starlink router and rebroadcasts that connection as a long-range HaLow signal. No ethernet cable between the dish and the unit, no changes to your Starlink setup.

At each remote location: A second TX-E Connect unit — Indoor or Outdoor depending on the situation — receives the HaLow signal and rebroadcasts standard 2.4 GHz WiFi locally. Your phone, laptop, tablet, camera, or any other WiFi device connects to it exactly as it would at home. No special hardware, no configuration on the device side.

Because a single TX-E Connect Outdoor unit at the house broadcasts a HaLow signal across the whole property, adding a second or third location doesn't require any changes to the first unit. Each new location just needs its own Connect unit to receive the signal and provide local WiFi there.

What You Can Do Once Your Starlink Reaches the Whole Property

Extending Starlink with TX-E Connect isn't just about having WiFi in more places. It changes what's practically possible across the entire property.

The shed becomes a proper workspace. Internet in the shed means a computer or tablet for job management, streaming music or radio while you work, processing payments, accessing cloud files, and making calls without walking back to the house. For anyone running a business from a shed or workshop, it's the difference between a functional workspace and an isolated one.

Security cameras work anywhere. A camera at your front gate, your machinery shed, your hay barn, or your stock yards needs a network connection to send footage to your phone or recorder. With TX-E Connect extending your Starlink to those locations, cameras connect over WiFi without a separate 4G SIM for each one. Check on vehicles entering the property, monitor livestock overnight, or keep an eye on equipment — from your phone, wherever you are.

The granny flat or short-stay accommodation gets real internet. A second dwelling on the property — whether it's housing family, a long-term tenant, or Airbnb guests — needs internet that actually works. Guests arriving from the city may be on carriers with no rural coverage at all. TX-E Connect gives the granny flat its own reliable WiFi network running off your Starlink, without a second dish, a second subscription, or cable trenched between the buildings.

WiFi Calling replaces the mobile network. Once your phone is connected to the TX-E network — at the shed, the yards, or anywhere the HaLow signal reaches — it can make and receive calls over your Starlink internet connection using WiFi Calling. This is a standard feature on all modern smartphones, supported by every major Australian carrier. No mobile signal required. Your normal number, normal call quality, including calls to 000. For a property where mobile coverage is absent or unreliable, this is a meaningful practical change — not just a convenience, but a safety improvement for anyone working alone or in remote areas of the land.

TX-E Roam extends coverage on the move. For times when you're not near a fixed building — out in the paddock, along a fence line, checking on stock — TX-E Roam is a pocket-sized, battery-powered unit that connects to your TX-E network and keeps your phone connected as you move across the property. Wherever the HaLow signal reaches, Roam follows.

Setting Up TX-E Connect with Starlink

Setup is designed to be done by the property owner — no technician, no specialist tools, no technical background needed.

Mount TX-E Connect Outdoor in an elevated position at the house, with a clear view across the property.
Open the TX-E Connect app and enter your Starlink WiFi credentials. The unit connects to your Starlink router wirelessly.
TX-E Connect Outdoor begins broadcasting a HaLow signal across the property.
At each location you want to cover, place a TX-E Connect Indoor or Outdoor unit. It connects to the HaLow signal automatically and creates a local WiFi network for devices there to connect to.

Most installations take under an hour. TX-E's team is available if you get stuck.

Choosing the Right Unit for Each Location

TX-E Connect Outdoor is the right choice for the main house unit — it's weatherproof, designed for external mounting, and its antenna is optimised for maximum range across the property. It's also the right choice for remote locations that are further out, exposed, or where a long driveway gate or external mounting point is needed.

TX-E Connect Indoor suits locations where the unit will be inside a building and can be placed near a window facing the main house. For most shed and granny flat connections within around 100–200 metres, it handles the job well and is straightforward to mount and power.

For metal-clad sheds, placing the Connect Indoor near a window — or mounting a Connect Outdoor on the external wall — is the most reliable approach, since steel walls attenuate any wireless signal significantly. Our article on why you can't get a signal inside a metal shed covers this in more detail.

Already Have Starlink? You're Most of the Way There

The most common situation we hear from rural Australians is this: Starlink is excellent. The internet is fast. The property still doesn't have coverage where it matters.

That gap — between great internet at the house and nothing twenty metres beyond it — is exactly what TX-E Connect is designed for. Your Starlink subscription stays the same. Your dish stays the same. TX-E Connect takes what you already have and spreads it across your whole property.

Explore TX-E Connect → See TX-E Roam → Visit the TX-E shop → Contact us to discuss your property →

Related articles: